Deep Cleaning and Lubricating Chain Oil for Superior Durability

APPLICATION:

• Motorcycle, ATV, scooter, e-bike, and bicycle chains
• Go-kart and racing vehicle chains
• Industrial, agricultural, and construction machinery chains
• Marine chains and humid environments
• Garage and workshop chain maintenance
• Any metal chain needing lubrication and rust protection

DIRECTIONS FOR USE:

1. Clean the chain thoroughly before application to remove old grease, dirt, and debris.

2. Shake the bottle or can well to ensure even mixing of the lubricant.

3. Spray or apply evenly along the inner and outer sides of the chain while slowly rotating the wheel.

4. Allow 10–15 minutes for the lubricant to penetrate and form a durable protective film.

5. Wipe off excess lubricant with a clean cloth to prevent dust buildup.

6. Reapply periodically—especially after washing, riding in rain, or long-distance travel—for consistent protection.

WARNINGS:

• Apply only to cool, stationary chains. Do not apply to hot or moving chains.
• Avoid getting lubricant on brake discs, tires, and plastic parts.
• Use in a well-ventilated place. Do not breathe in the spray.
• Keep away from open flames and heat.
• Store sealed in a cool, dry place, away from sunlight.
• Keep out of reach of children and pets.
• Do not use too much. Too much oil can attract dust or fling off.
• Dispose of empty containers properly.
• Apply lubricant regularly, especially in wet or dusty conditions.
• If it gets on your skin or eyes, rinse with water right away.